plinthe base console assembly instructions ! Tools supplied: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
plinthe base console assembly instructions 1. At the top and bottom of the end panel screw in cam bolts (D) as the drawing shows. Insert cam locks (E) into bottom panel and back rail. Align bottom panel and back rail with the cam bolts and press firmly into place. Turn cam lock clockwise to lock bottom panel and back rail in place. Next, align partition with the bottom panel. Insert bolts (A), lock washers (C) and flat washers (B) and tighten with supplied hex key. Do not overtighten.
plinthe base console assembly instructions 2. Slide back panel down into grooves in back of the End panels like the drawing shows. 3. Insert cam bolts (D) into the bottom of the top panel. Insert cam locks (C) into the sides of the partitions and end panels. Press the top down onto the case and tighten the cam lock clockwise with a screwdriver. D 6x E 6x 93379363/9379371 - 01.16.
plinthe base console assembly instructions 4. Align base with bottom panel.Insert bolts (A) ,lock washer (C),and flaft washer (B).Tighten with supplied hex key.Do not over tighten. B C A 93379363/9379371 - 01.16.
plinthe base console assembly instructions 5. Press plastic clasps into grooves on back of unit like drawing shows. Insert screws into claps. Tighten with screwdriver. H G 6x 93379363/9379371 - 01.16.
plinthe base buffet assembly instructions 5. Align door handle (G) with notch on door. Insert screws (H) through door handle (G) into door. Do Not Overtighten! H G 9379363/9379371 - 01.16.
plinthe base buffet assembly instructions 6. Attach doors to hinges preassembled on inside of end panel. Use a screwdriver on the back screw to adjust the doors once the are installed. F 7. Open doors straight out. insert shelf pins (F) into the desired holes in the end panels and partitions. Carefully slide shelves into place. 9379363/9379371 - 01.16.
plinthe base buffet assembly instructions Note: Hinges are adjustable. A combination of these adjustments may be necessary to level doors. FOR SIDE adjustment (adjusting the gap between doors and leveling doors) c 1. Adjust gap by turning screw B A FOR DEPTH adjustment (adjusting how close the doors rest against the cabinet): B 1. Loosen screw A . 2. Adjust depth. 3. Re-tighten screw A . FOR HEIGHT adjustment c 1. Loosen screw C (both screws) 2. Adjust height. 3. Re-tighten screws.
plinthe base console assembly instructions NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching unit to wall with anti-tip kits. 1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximatly 1” below the top on the back of the unit. 2.
