Assembly Instruction

parsons end table

assembly instructions

Page 2 of 209-30-09

1. Align legs with shelf like the drawing shows. Insert bolt (A), spring washer (B), and  at washer (C), into

the holes shown. Tighten with supplied hex key. Do not tighten completely.

CARE INSTRUCTIONS

Hardware may loosen overtime. Periodically check that all connections are tight.

Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.

2. Lay top upside down on a clean smooth surface. Align assembled shelf and legs over top. Slide legs

into the bottom of the top. Insert bolt (D), spring washer (B), and  at washer (C), into the

holes shown. Tighten with supplied hex key.

3. Tighten all bolts completely using supplied hex key. Turn assembled table upright.