Assembly Instruction

parsons bookcase
assembly instructions
Page 5 of 55497938/5497946 - 02.29.08
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
Long
screws
Short
screws
NOTICE:
To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching bookcase to wall with anti-tip kits.
1. Determine where the bookcase is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximatly 1” below the top on the back of the bookcase.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the bookcase top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten bookcase snug against wall.
NOTE: There will be extra pieces left over from the anti-tip kit, please discard.
5. Repeat for second tip kit