Assembly Instruction

ManualsBrandsWest Elm ManualsChairsWest Elm Overlapping-Squares Counterstool

overlapping squares counterstool

assembly instructions

Page  of 5945566 - 03/07

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

A B

C D

large at washer 8x

large lock washer 8x

large allen key x

long bolt 4x medium bolt 4x

short bolt 8x

small lock washer 8x

small at washer 8x

small allen key x

Summary of content (5 pages)

PAGE 1
overlapping squares counterstool assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
overlapping squares counterstool assembly instructions (1) (2) (3) (4) chair back seat frame left front leg right front leg (5) front stretcher 9145566 - 03/07 (6) left side stretcher (7) right side stretcher Page of 5
PAGE 3
overlapping squares counterstool assembly instructions 1. Fasten seat frame (2) to chair back (1) using short bolts (C), small lock washers (F), and small flat washers (G) as shown. Tighten bolts using small allen key (I). 2. Fasten seat frame corner blocks to chair back (1) using long bolts (A), large lock washers (D), and large flat washers (E) as shown. Tighten bolts using large allen key (H).
PAGE 4
overlapping squares counterstool assembly instructions 3. Fasten left (6) and right (7) side stretchers to back legs using short bolts (C), small lock washers (F), and small flat washers (G) as shown. Tighten bolts using small allen key (I). I C F G 7 6 4. Fasten front stretcher (5) to left (3) and right (4) front legs using short bolts (C), small lock washers (F), and small flat washers (G) as shown. Tighten bolts using small allen key (I).
PAGE 5
overlapping squares counterstool assembly instructions 5. Fasten side stretchers to front legs using short bolts (C), small lock washers (F), and small flat washers (G) as shown. Tighten bolts using small allen key (I). 6. Fasten front legs to seat frame using medium bolts (B), large lock washers (D), and large flat washers (E) as shown. Tighten bolts using large allen key (H). H B E D 4 3 G F I C CARE INSTRUCTION Hardware may loosen over time. Periodically check that all connections are tight.