Assembly Instruction

overlapping squares barstool
assembly instructions
Page 4 of 594554 - 08/07
. Fasten left (6) and right (7) side stretchers to back legs using short bolts (C), small lock washers (F), and small at washers (G)
as shown. Tighten bolts using small allen key (I).
G
F
C
I
6
7
4. Fasten front stretcher (5) to left () and right (4) front legs using short bolts (C), small lock washers (F), and small at washers
(G) as shown. Tighten bolts using small allen key (I).
G
F
C
I
3
5
4
NOTE: When assembling the overlapping squares barstool, do not fully tighten bolts on side stretchers until front legs have
been attached to seat. Once front legs are attached to stretcher and seat bottom, tighten both bolts on each side stretcher.