Manualshelf

Assembly Instruction

ManualsBrandsWest Elm ManualsTablesWest Elm Modular Tall Table Top
12
modular tall table top
assembly instructions
Page 2 of 2
1. Lay top upside down on a soft surface to protect nish. Attach metal bracket (A) to table top
by aligning predrilled holes on metal bracket to pre-drilled holes in under top frame. Run 3 screws
(B) to hold each bracket to under top frame.
2. Position 2 tall bookcases to make sure the distance between them match the distance between
the 2 assembled metal brackets under top. Carefully ip the top right side up with a helper. Then lift
on 2 bookcases as shown below. Run 3 screws (B) on each bracket through pre-drilled holes in
brackets with Philips head screw driver to hold metal brackets to bookcase.
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
A
B
B
B
A
9186792-03.26.09