Assembly Instruction

ManualsBrandsWest Elm ManualsStorage FurnitureWest Elm Modular Storage Collection - Cabinet

: modular storage collection - cabinet

6811285 / 6811301 - 03/05

page 1 of 5

assembly instructions

mounting plate 2x

screw 4x

� �

MOUNTING HARDWARE (included with each modular unit):

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.

! Use mounting hardware to secure unit(s) to base and units together when placed beside or on top of each other.

! Use overbalance protection hardware (included with base) when stacking 3 to 4 units high.

! Do NOT stack more than 3 units high.

Summary of content (6 pages)

PAGE 1
: modular storage collection - cabinet assembly instructions ! ! ! ! ! ! Tools required: Do not throw away packaging materials until assembly is complete. Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish. Use mounting hardware to secure unit(s) to base and units together when placed beside or on top of each other. Use overbalance protection hardware (included with base) when stacking 3 to 4 units high. Do NOT stack more than 3 units high.
PAGE 2
: modular storage collection - cabinet assembly instructions 1. Place shelf on shelf pins inside cabinet.
PAGE 3
: modular storage collection - cabinet assembly instructions 1. Connect unit to base or units together with mounting plates (A) and screws (B). Insert screws into pre-drilled holes as shown. Tighten with a Philip's head screwdriver. secure units together when stacking secure units together when stacking � � � � � � secure unit to base BACK VIEW. CARE INSTRUCTIONS: Wipe with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.
PAGE 4
: modular storage collection - cabinet assembly instructions Examples of how units can be placed on bases (back view): � � � 6811285 / 6811301 - 03/05 � page 4 of 5
PAGE 5
: modular storage collection - cabinet assembly instructions Examples of how units can be placed on bases (back view): � � � 6811285 / 6811301 - 03/05 � page 5 of 5
PAGE 6
: modular storage collection - cabinet assembly instructions OVER BALANCE. To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the overbalance protection hardware included with this product. 1. Attach the mounting brackets horizontally to the top back edge of the furniture. Insert the short screws through the holes in the bracket and tighten securely using screwdriver. 2.