Assembly Instruction

modular lateral file cabinet
assembly instructions
Page 6 of 7
7. Unfold upper drawer box (H). Slide drawer bottom panel (J) into the drawer box
groove on back side of drawer front (G) with exposed edge of drawer bottom panel (J).
Run 3 screws (S) through drawer box (H) to each side of drawer front (G), tighten screws
(S) with allen key (U). Put two drawer support rails (L) in the notches on back side of
assembled drawer. Run two screws (T) through pre-drilled holes in each end of drawer
support rail (L) as shown below. Tighten all screws (T) with Philips head screw driver.
8. Repeat step for lower drawer box (I) assembly.
9. Install le bars (K) into the walls of upper drawer box (H) and lower drawer
box (I) as shown.
8600660-3.26.09
Upper Drawer Box (H) Lower Drawer Box (I)