Assembly Instruction

modular lateral file cabinet
assembly instructions
Page 5 of 7
5. Insert four cam bolts (N) into pre-drilled inserts at corners of top (F) as shown
below. Tighten cam bolts (N) with Phillips head screw driver.
6. Carefully ip over top (F) and assemble with end/back panels (A) by aligning
cam bolts on top (F) with pre-drilled holes in end/back panels (A). Insert four cam houses
(M) into pre-drilled holes on end/back panels (A) as shown below. Tighten cam house
(M) with allen key (U).
8600660-3.26.09