Assembly Instruction

modular lateral file cabinet
assembly instructions
Page 3 of 7
A
N
A
M
A
B
C
1. Unfold end/back panel (A). Put cam bolt (N) into pre-installed inserts in each end
panel at the front as shown below. Tighten cam bolts (N) with Phillips head screw driver.
2. Assemble center partition (B) and bottom rail (C) with end/back panels (A) by
aligning pre-drilled holes in center partition (B) and bottom rail (C) with cam bolt (N)
assembled in step 1. Put cam house (M) in pre-drilled hole at each end of center partition
(B) and bottom rail (C) as shown below. Tighten cam house (M) with allen key (U).
8600660-3.26.09