Assembly Instruction

modern storage console

assembly instructions

Page 3 of 67896905/7896822—05/06

5. Insert back panel into grooves in outside panels as shown. The warning sticker on the back panel should face the outside of

the cabinet. Slide down fully into place.

6. Insert wood dowels (I) into holes on top of back panel.

7. Insert barrel nut (E) into predrilled hole in face of side panel as shown. Use screwdriver to align opening in barrel nut (E) with

hole in bottom edge of side panel.

8. Insert bolt (D) and washer (H) through predrilled hole in bottom face of bottom panel as shown. Tighten using allen key (G).