Assembly Instruction

5. Insert wooden dowels (F) into pre-drilled holes in top side of the bottom panel as shown.

6. Insert cams (D) into pre-drilled holes in top side of the bottom panel as shown. Tighten with phillips-head screw driver.

7. Set door into place as shown, then set bottom panel into place by aligning dowels and cams in bottom panel with

pre-drilled holes in side panels and inserting as shown. Insert cam locks (C) into pre-drilled holes in the side panels as

shown. Tighten with phillips-head screw driver.

page 5 of 12

: metal leg storage desk

assembly instructions

7682925- 01/09