Assembly Instruction

1. Assembly begins with the cabinet upside down. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of
the top panel as shown.
2. Insert cams (D) into pre-drilled holes in the bottom-side of the top panel as shown. Tighten with phillips-head screw
driver.
3. Set side panels into place over cams and wooden dowels, and slide back panel into channels in side panels as shown.
Insert cam locks (C) into pre-drilled holes in the side panels as shown. Tighten with phillips-head screw driver.
page 3 of 12
D
6x
6x
C
F
6x
: metal leg storage desk
assembly instructions
7682925- 01/09