Assembly Instruction

page 1 of 3

assembly instructions

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.

: low cubby side table

cam: 1/4”DIA x 1 3/8”

4872032/6860407/8697625 - 09/06

! Tools required:

cam lock

PAGE 1
: low cubby side table assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
PAGE 2
: low cubby side table assembly instructions 1. Place table upside down on a flat surface. 2. Insert cams (A) into holes on tabletop as shown and tighten cams with a flat head screwdriver. 6x A 3. Place base on tabletop, aligning holes in base with cams.
PAGE 3
: low cubby side table assembly instructions 4. Insert cam locks (B) into holes on inside of base. Tighten with a philip’s head screwdriver. 6x B CARE INSTRUCTIONS. Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.