Assembly Instruction

hudson 5 drawer dresser
assembly instructions
Page 2 of 38407108/8407074/ 8687238 - 11/06
1. Before starting assembly, take out all accessories inside large bottom drawer. Then place the chest upside down on a smooth,
scratch-free surface.
2. Attached each metal leg by aligning it on the pre-drilled holes underneath the chest . Insert bolts (A) into the leg beam as
shown and tighten using the allen key (C). Then insert screws (B) into the plate and tighten using a phillips head screwdriver.
CARE INSTRUCTION
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.