Assembly Instruction

hudson 5 drawer dresser

assembly instructions

Page 1 of 38407108/8407074/ 8687238 - 11/06

A B

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

bolt 6x screw 8x

allen key 1x

PAGE 1
hudson 5 drawer dresser assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
hudson 5 drawer dresser assembly instructions 1. Before starting assembly, take out all accessories inside large bottom drawer. Then place the chest upside down on a smooth, scratch-free surface. 2. Attached each metal leg by aligning it on the pre-drilled holes underneath the chest . Insert bolts (A) into the leg beam as shown and tighten using the allen key (C). Then insert screws (B) into the plate and tighten using a phillips head screwdriver. CARE INSTRUCTION Hardware may loosen over time.
PAGE 3
hudson 5 drawer dresser assembly instructions OVER BALANCE. To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the overbalance protection hardware included with this product. 1. Attach the mounting brackets horizontally to the top back edge of the furniture. Insert the short screws through the holes in the bracket and tighten securely using screwdriver. 2.