Assembly Instruction

garvey side chair

assembly instructions

Page 1 of 38757353/ 8757361/ 8757411 - 10/06

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

bolt 8x

at washer 8x

allen key 1x

lock washer 8x

PAGE 1
garvey side chair assembly instructions ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
PAGE 2
garvey side chair assembly instructions 1. Lay back frame on the floor and locate seat as shown. Fasten seat to back through holes using 4 bolts (A), lock washers (B), and flat washers (C) in order as shown. Tighten with allen key (D).
PAGE 3
garvey side chair assembly instructions 2. Insert left and right front legs into seat frame, orienting each leg as shown. Fasten legs to chair through holes using 4 bolts (A), lock washers (B), and flat washers (C) in order as shown. Tighten with allen key (D). outside corner inside edge C B D A CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.