Assembly Instruction

floating storage console

assembly instructions

Page 1 of 3

! Tool required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as: cardboard or carpet to protect finish.

! Proper assembly of this item requires 2 people.

Hardware

short bolt 4x

long bolt 4x

lock washer 8x

flat washer 8x

allen key 1x

CAUTION

• The top shelf of this cart/stand is intended for use with Plasma/LCD/DLP/HD televisions having a maximum

screen size of 42 inches and weight of 80 lbs; or Tube televisions having a maximum screen size of 24 inches

and weight of 80 lbs.

• All other support shelves should not be loaded more than 25 lbs.

• DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights

indicated may result in instability causing possible injury.

• This unit contains a permanent sticker located either beneath media support shelf or inside drawer.

• Do not allow children under 16 years to move cart.

9443367-03.26.09

PAGE 1
floating storage console assembly instructions ! Tool required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as: cardboard or carpet to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
floating storage console assembly instructions 1. Put the console upside down on a soft surface, such as: cardboard or carpet to protect finish. Fasten metal legs to console with short bolt (A), long bolt (B), lock washer (C) and flat washer (D) as shown below. Tighten all bolts with supplied allen key (E). A 2. With 2 adults turn the console to upright position. CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth.
PAGE 3
floating storage console assembly instructions NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this product. Attaching unit to wall with anti-tip kits. 1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximatly 1” below the top on the back of the unit. 2.