Assembly Instruction

ManualsBrandsWest Elm ManualsBedsWest Elm Circle Cutout Daybed

: circle cutout daybed

page 1 of 7

assembly instructions

bolt : 6mm dia x 60mm 4x

allen key 1x

GFE

! Tools required :

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface,

! Proper assembly of this item requires 2 people.

! Bed slats are not included in this box.

screw 19mm 4x

bolt : 6mm dia x 19mm 4x

screw 40mm 4x

plate 2’’ 2x corner block 2x

DCB

937484 4 - 0 5/0 7

Summary of content (7 pages)

PAGE 1
: circle cutout daybed assembly instructions ! ! ! ! ! Tools required : Do not throw away packaging materials until assembly is complete. Assemble this item on a soft surface, Proper assembly of this item requires 2 people. Bed slats are not included in this box.
PAGE 2
: circle cutout daybed assembly instructions 1. Lay down left / right side panel. 2. Insert corner blocks ( G ) into the pre-drilled holes in side panel as shown. 3. Do not screw the corner block to the side panels yet.
PAGE 3
: circle cutout daybed assembly instructions 4. Assemble side panels to back panel as shown. 5. Secure them with 4 bolts ( A ). Tighten with allen key ( D ).
PAGE 4
: circle cutout daybed assembly instructions 6. Assemble front rail as shown. 7. Secure it with 4 bolts ( C ). Tighten with allen key ( D ).
PAGE 5
: circle cutout daybed assembly instructions 8. Attach the L plates ( F ) to front rail and side panel as shown. 9. Secure them with 4 screws ( B ) - 2 screws for each side.
PAGE 6
: circle cutout daybed assembly instructions 10. Secure the corner blocks to back and side panels using 4 screws ( E ). 11. Check one more time and tighten all bolts and screews.
PAGE 7
: circle cutout daybed assembly instructions 12. Place bed slats on ledge on front rail and back panel. Stoppers on ledge hold last slats in place. last slat stopper CARE INTRUCTIONS: Hardware my loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.