Assembly Instruction

bergen closet wide 1 drawer
assembly instructions
Page 2 of 69181330 / 9181314 - 04/07
2. Insert large cam locks (B) into holes of side panels. Turn cam locks with a phillips screwdriver so that the arrow on top is
pointing out.
3. With a hammer gently tap wooden dowels (D) into holes in side of panels.
B
D
1. Attach drawer glides (K) to side panels using small screws (F) as shown. The FRONT of each drawer glide should be fastened
through the third round hole from the front of the glide. The BACK of each drawer glide should be fastened through the rst round
hole from the back of the glide.
Left
bottom edge
3rd hole from the front
K
F
1st hole from the back
K
F
bottom edge
Right