Assembly Instruction

bergen closet wide 3 drawer valet
assembly instructions
Page 6 of 698397 / 98348 - 0/07
3. Slide drawers onto glides and fasten together with short dome screws (E) from inside the drawer into the hole in the glide.
Tighten with a phillips screwdriver.
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
D
G
4. Multiple units can be attached together as shown using small screws (D) and mounting plates (G). If stacking units use felt
pads (M) between units to minimize scratching.
E