Assembly Instruction

bergen closet wide 3 drawer valet

assembly instructions

Page  of 698397 / 98348 - 0/07

. Attach drawer glides (L) to side panels using small screws (D) as shown. The FRONT of each drawer glide should be fas-

tened through the third round hole from the front of the glide. The BACK of each drawer glide should be fastened through the

rst round hole from the back of the glide.

. Insert large cam locks (C) into holes of side panels. Turn cam locks with a phillips screwdriver so that the arrow on top is

pointing out.

3. With a hammer gently tap wooden dowels (A) into holes in side of panels.

Left

bottom edge

3rd hole from the front

1st hole from the back

Right