! & ! - / ) 0 ' # ( * * $ # % # " $
1. Carefully lay stone top upside down onto a clean smooth surface such as carpet or cardboard. Align leg frame with holes in top. Insert bolt (A), lock washer (C), and flat waher (D). Tighten with supplied hex key (E). 1.Déposez avec soin le plateau de pierre à l’envers sur une surface lisse telle que du tapis ou du carton. Alignez le piétement avec les trous situés sous le plateau. Insérez le boulon (A), la rondelle d’arrêt (C) et la rondelle plate (D). Serrez-le à l’aide de la clé hexagonale (E) fournie.
2. Align bottom leg frame with assembly from step 1. Make sure to align tenons into slots in frames. Insert bolt (B), lock washer (C), flat washer (D), and tighten with supplied hex key (E). With help carefully flip the table up right without leaning it on the legs as you turn it over. This could cause damage to the table. 2. Alignez le piètement inférieur avec l’unité assemblée à l’étape 1. Assurezvous d’aligner les tenons avec les mortaises.
CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Use a coaster under all drinks hot or cold. Always use a trivet for hot items. Blot up spills immediately, before they can penetrate the surface. Common foods or drinks that contain alcohol, citrus juices, vinegar, or even oil can etch the stone. Clean stone surfaces with a few drops of neutral cleaner or stone soap, available in hardware stores or from a stone dealer.
