Assembly Instruction

2x2 console
assembly instructions
Page 3 of 402.19.10
1. Connect 2 corner legs and 2 inner legs to each center shelf by inserting short bolt (A), lock washer(B),
and  at washer(C). Make sure the 2 corner legs are on the same side of the shelf as shown.
E
E
2. insert wooden dowels(E) into the pre-drilled holes located on the bottom shelf. Align and connect
the assembled legs and shelf from step 1 to the wooden dowels in the bottom shelf. Insert bolt(D),
lock washer(B), and  at washer(C) thru bottom into legs. Tighten with supplied hex key.
Repeat this step for both sets of shelves.
D
B
C
A
B
C