Assembly Instruction

2x2 bedframe-twin

assembly instructions

Page 1 of 310-01-09

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.

! Proper assembly of this item requires 2 people.

Hardware

x1 mm011 x 5m yek nella x8 mm61 x 8m tlob

PAGE 1
2x2 bedframe-twin assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
x2 bedframe-twin assembly instructions 1.Place the headboard and footboard upside down on a clean smooth surface. 2. Place one of the side rails in between the headboard and footboard as shown in illustration. Insert bolt (A) into the headboard and footboard brackets and screw halfway using allen key (B). Do not completely tighten bolts. 3. Carefully set slats into frame as shown. Making sure the last slat is on the outside of the stop block.
PAGE 3
2x2 bedframe-twin assembly instructions ip bed over. CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. nish, avoid the use of chemicals and household cleaners.