User Manual

5.4 Displays at operating level
5.4.1 Display line 1
The value shown on display line 1 can be determined by configuration Dis1. This configuration is adjustable only via
BlueControl
®
. The following values can be displayed:
–
process value (default)
–
limit value LC
The display value, which is also called process value, is the value resulting from function 1. Normally, this is input
value 1.
5.4.2 Display line 2
The value to be displayed continuously in the second LCD line can be selected from different values via the
BlueControl
Ò
engineering tool.
Normally the internal limit value LC is set.
1 Display 1: Measured value
Display 2: Limit value LC (default-setting)
2 Display 1: Limit value LC
Display 2: phys. unit
g
Delete the entry for display line 2 to return to limit value display.
g
With faulty input values, signals dependent on the inputs (e.g. Inp1, Inp2, display value, Out3) also indicate FAIL.
Operation
18 Displays at operating level TB 45
1
2
TB E
278.3
450.0
äüä
1
2
TB E
450
°C
ä äüüü
1
2