Manual

6.8 Reset to default
In case of faulty configuration, the device can be
reset to the default manufacturers condition.
1
For this, the operator must keep the keys
increment and decrement pressed during
power-on.
2
Then, press key increment to select YES.
3
Press enter to call up the password menu and
to enter the valid password. If the password
is faulty, reset is not possible.
4
Confirm factory resetting with Enter and the
copy procedure is started
(display
COPY).
5
Afterwards the device restarts.
In all other cases, no reset will occur (timeout
abortion).
g
If one of the operating levels was blocked in BlueControl
Ò
, reset to factory setting is not possible.
g
The copy procedure ( COPY) can take some seconds.
Now, the transmitter is in normal operation.
Functions
TB 45 Reset to default 31
FAC
torY
FAC
no
+ Power on
FAC
yEs
ô
FAC
PASS
8.8.8.8
#:#:#:#:#
ääää
1
2
3
4
5
FAC
COPY
ô