Owner manual

g
The variable to be monitored can be selected seperately for each alarm via
configuration
The following variables can be monitored:
w
process value
w
control deviation xw (process value - LC limit ( LC ))
3.7 Operating structure
After supply voltage switch-on, the controller starts with the operating levels.
The controller status is as before power off.
g
PArA - level: At PArA - level, the right decimal point of the upper
display line is lit continuously.
g
ConF - level: At ConF - level, the right decimal point of the upper
display line blinks.
All levels are only accessible by entry of the password PASS .
When safety switch Loc is open, no access to all levels is possible.
Factory setting:
Safety switch Loc closed: all levels accessible without
restriction, password PASS = 45.
Safety switch
Loc
Password entered with
BluePort®
Function disabled or enabled
with BluePort®
Access via the instrument
front panel:
closed OFF / password disabled / enabled
enabled
open OFF / password disabled
disabled
open OFF enabled
enabled
open Password enabled
enabled after password
entry
Operation
Operating structure 12 TB40-1
Ù
Ù
Ù
Ù
End
126
CAL
126
ConF
126
125
126
PArA
126
Ù
Ì
Ì
Ì
3sec.
PASS
PASS
PASS
PASS