Manual

5.4.4 Slave pointer function
The minimum and maximum input values are stored in the unit.
The minimum input value is displayed as long as key Ì is
pressed.
The maximum input value is displayed as long as key È
is pressed.
Deleting the minimum value
The minimum value is deleted by pressing key È whilst key Ì is kept pressed.
Whether the minimum value should be deleted also by the digital input (rES.L) can be determined during configura-
tion.
Deleting the maximum value
To delete the maximum value, press key Ì whilst keeping key È pressed.
Whether the maximum value should be deleted also by the digital input (rES.H) can be determined during configura-
tion.
Deleting the minimum and maximum values is possible also via interface.
g
When de-energizing UNIFLEX SG 45 the minimum and maximum values are deleted.
g
In case of error of the display value (e.g. input fail behaviour), the minimum and maximum values are also
set to FAIL. When a valid value is displayed again, the minimum and maximum value are deleted.
5.4.5 Selecting the units
The unit to be displayed is determined via configuration D.Unt.
By selecting D.Unt = 22, display of any max. 5-digit unit or text can be determined.
1 Unit (example): kilogram
2 Text (example): TAG no.
Operation
UNIFLEX SG 45 Displays in the operating level 20
1
2
FE
450.3
502.4
äüüü
1
2
FE
450.3
ûC
äüüü
max
1
2
FE
450.3
26.7
äüüü
1
2
FE
450.3
ûC
äüüü
min
1
2
FE
4.5
Kg
äüüü
1
2
FE
450.3
TI451
äüüü
1
2