Instruction Manual

Configuration level
9499-040-93811 / 59537-1 Page 40 of 88 Pro-16
pPre Access preset to end and reset (only visible with
BlueControl
®
!)
0
0 No
1 Yes
pRun Access run / stop (only visible with BlueControl
®
!) 0
0 No
1 Yes
pCom Access common program parameters (only visible with
BlueControl
®
!)
0
0 No
1 Yes
Pass OFF...9999 Password (only visible with BlueControl
®
!) OFF
IPar Block parameter level (only visible with BlueControl
®
!) 1
0 Released
1 Blocked
ICnf Block configuration level (only visible with BlueControl
®
!) 1
0 Released
1 Block
ICal Block calibration level (only visible with BlueControl
®
!) 1
0 Released
1 Blocked
F.Coff Switch-off behaviour (only visible with BlueControl
®
!) 0
0 PID - controller functions off
1 All functions off
D2.Err Error displayed in display 2 (only visible with BlueControl
®
!) 0
0 No reaction to errors
1 Blinking error display
PDis3 display 3 programmer operation (only visible with
BlueControl
®
!)
0
0 Segment no., Segment type, remaining prog time
1 Segment no., Segment type, remaining segm time
2 Segment no., Segment type, total time
3 Program no., Segment type, remaining prog time
4 Program no., Segment type, remaining segm time
5 Program no., Segment type, total time
g
Resetting the controller configuration to factory setting (Default
r chapter 13.1 (page 86)