Instruction Manual

Configuration
level
9499-040-93811 / 59537-1 Page 37 of 88 Pro-16
8 Limit 2
9 Limit 3
Err.r Reset of all error list entries 0
0 no function (switch-over via interface is possible)
2 DI1
3 Di 2
4 DI3 (only visible with OPTION)
5 DI4 (only visible with OPTION)
6 è -Key function (see chapter 3.6 page 14)
7 Limit 1
8 Limit 2
9 Limit 3
booS Boost function: setpoint increases by SP.bo for the time t.bo 0
0 no function (switch-over via interface is possible)
2 DI1
3 Di 2
4 DI3 (only visible with OPTION)
5 DI4 (only visible with OPTION)
6 è -Key function (see chapter 3.6 page 14)
7 Limit 1
8 Limit 2
9 Limit 3
Pid.2 Switching of parameter set (Pb, ti, td) 0
0 no function (switch-over via interface is possible)
2 DI1
3 Di 2
4 DI3 (only visible with OPTION)
5 DI4 (only visible with OPTION)
6 è -Key function (see chapter 3.6 page 14)
7 Limit 1
8 Limit 2
9 Limit 3
P.run Programmer Run/Stop (see page ) 0
0 no function (switch-over via interface is possible)
2 DI1
3 Di 2
4 DI3 (only visible with OPTION)
5 DI4 (only visible with OPTION)