Instruction Manual

Configuration level
9499-040-93811 / 59537-1 Page 34 of 88 Pro-16
0 not active
1 active
HC.SC Solid state relay (SSR) short circuit signal (only visible when
O.TYP=0)
0
0 not active
1 active
timE Timer active (only visible when
O
.
TYP
=0) 0
0 not active
1 active
t.End Timer End (only visible when
O
.
TYP
=0) 0
0 not active
1 active
P.End Programmer end signal (only visible when O.TYP=0) 0
0 not active
1 active
FAi.1
FAi.2
INP1/ INP2 error (only visible when O.TYP=0) 1
0 not active
1 active
PrG.1
PrG.2
PrG.3
PrG.4
Program track 1 to 4 (only visible when
O
.
TYP
=0) 0
0 not active
1 active
CALL Operator call (only visible when
O
.
TYP
=0) 0
0 not active
1 active
fOut Forcing OUT3 (only visible with BlueControl!) 0
0 No forcing
1 Forcing via serial interface
Out.4 / Out.6
Configuration parameters as Out.1 except for: Default Y.1 = 0, Y.2 = 0
g
Method of operation and usage of output Out.1 to Out.6:
Is more than one signal chosen active as source, those signals are OR-linked.