User Manual

Calibration: Complies with BS4937, NBS125 and IEC584.
Sensor Break Protection: Break detected within two seconds. Control
outputs set to OFF (0% power); Alarms
operate as if the process variable has
gone over-range.
Resistance Temperature Detector (RTD) and DC mV: Ranges selectable
from front panel (with displayed codes):
Type and Connection: Three-wire Pt100
Calibration: Complies with BS1904 and DIN43760.
Lead Compensation: Automatic scheme.
RTD Sensor Current: 150µA (approximately)
Sensor Break Protection: Break detected within two seconds. Control
outputs set to OFF (0% power). Alarm
operation is as follows:
S054-A A-2
59125
Type Input Range Dislayed Code Type Input Range Displayed Code
L
0.0 - 205.7°C
1815 L
32 - 1403°F
1820
L
32.0 - 402.2 °F
1816 B
211 - 3315°F
1934
L
0 - 450°C
1817 B
100 - 1824°C
1938
L
32 - 841°F
1818 N
0 - 1399°C
5371
L
0 - 762°C
1819 N
32 - 2550°F
5324
Input Range Displayed Code Input Range Displayed Code
0 - 800 °C *
7220
0.0 - 100.9 °C
2295
32 - 1471°F
7221
32.0 - 213.6 °F
2296
32 - 571°F
2229
-200 - 206°C
2297
-100.9 - 100.0°C
2230
-328 - 402°F
2298
-149.7 - 211.9°F
2231
-100.9 - 537.3°C
7222
0 - 300 °C
2251
-149.7 - 999.1°F
7223