User Manual

2 SET UP MODE 2-1
2.1 ENTRY INTO SET UP MODE 2-1
2.2 SET UP MODE PARAMETERS 2-2
2.3 OPERATOR MODE DISPLAYS 2-13
2.4 TUNING THE CONTROLLER MANUALLY 2-13
2.5 SELF-TUNE AND PRE-TUNE FACILITIES 2-14
2.6 EXIT FROM SET UP MODE 2-15
3 RS485 SERIAL COMMUNICATIONS 3-1
3.1 COMMUNICATIONS ENABLE/DISABLE 3-1
3.2 PHYSICAL REQUIREMENTS 3-1
3.3 INDIVIDUAL PARAMETERS 3-5
3.4 ERROR RESPONSE 3-10
(iv ) O054-V1
59125