Owner manual

3
TABLE OF CONTENTS
SECTION 1 - GENERAL PAGE NUMBER
1.1 Product Description 5
SECTION 2 - INSTALLATION & WIRING
2.1 Installation & Wiring 8
2.2 Unpacking 8
2.3 Location 8
2.4 Mounting 8
2.5 Preparation for Wiring 9
2.6 Wiring Connections 14
SECTION 3 - CONFIGURATION
3.1 Configuration (Set Up) 21
3.2 Configuration/Jumper Positioning 22
3.3 Operation Summary 22
3.4 Start Up Procedures 22
3.5 Front Panel Operation 23
SECTION 4 - OPERATION
4.1 Off Control Mode 42
4.2 Alarm Operation 47
4.3 Tune Mode Operation 48
SECTION 5 - SERVICE
5.1 Service 50
5.2 Changing Charts 50
5.3 Changing Pens 50
5.4 Calibration 51
5.5 Test Mode Procedures 56
5.6 Troubleshooting and Diagnostics (Error Code Definitions) 60
APPENDICES
A - Board Layouts and Jumper Positioning
A-1 - Processor Board 67
A-2 SPST Relay/SSR Driver Output Board 68
A-3 SPDT Relay/SSR Driver Output Baord 69
A-4 Current Output Board 70
B - Glossary 71
C- Order Matrix 74
D- Product Specifications 75
E- Software Record/Reference Sheet 78
F - Profile Development Sheet 81
Warranty Inside back page