Instruction Manual

II Engineering-Tool
II-1 Survey
The engineering tool for KS 98-1 enables the user to make an engineering which is specially tailored for his applicati
-
on. The engineering tool mainly comprises a function block editor supported by the IEC 1131-3 standards.
The engineering tool offers the following functions:
w
By selection from a menu, functions can be selected and placed in the working window.
w
Outputs and inputs can be connected graphically.
w
When shifting functions, the connections are dragged.
w
Function configuration and parameter setting.
w
Downloading of the engineering into KS 98-1.
w
Adjustment management.
w
Long-term storage of various engineerings on hard disk or floppy.
Coupling the PC with the KS 98-1 multifunction unit is done via an RS232/TTL adaptor cable, which can be ordered se
-
parately ( order number : 9407 998 00001).
II-1.1 Scope of delivery
The engineering tool scope of delivery comprises the following components:
w
One CD-ROM for English, French, and German version.
w
the operating instructions
w
licence conditions
w
registration with licence number
9499-040-82711 Survey
Scope of delivery II-51