Instruction Manual

I-9 Instrument settings in the main menu
I-9.1 CAN-Status
The CAN bus status with the connected units is displayed.
Value Signification
1...42
Node number
NC
NoCheck:
Node existence not checked so far / node not provided
Ck
Check:
Node existence just being checked.
NR
NoResponse:
No reply from this node, but node is required
OK
Ready:
Node has replied and is identified
ES
EMStart:Node has provided an emergency message
NA
NotAvailable: Node status is unknown
PO
PreOperation: Node is in the PreOperational status.
Er
Error:
Node is in error status
Op
Operational:
Node is in Operational status.
NU
NotUsed: Node is not required by an own
lib function.
Wa
Waiting:
Lib function waits for identification of this node.
Pa
Parametrierung: Lib function just setting the node parameters
OK
Ready:
Lib function has finished the parameter setting.
String detemined node name
I-9.2 Profibus-Status
The Profibus status page provides information on the Profibus connection
status. The following error statuses are displayed:
•
Bus access not successful
•
Faulty parameter setting
•
Faulty configuration
•
No data communication
I-9.3 ModC-Status
The status page of the modular C card provides information on correct in
-
stallation. Possible faulty installations are displayed:
•
Difference of configured and fitted module type
•
Power limits exceeded
Instrument settings in the main menu 9499-040-82711
I-34 CAN-Status