Instruction Manual
III-9.2 VWERT ( display / definition of process values (No. 96) )
General
This function permits display or definition of 6 analog or digital process values in 6 display lines. These values can be
changed also via the KS98-1 communication interface. The function block can be cascaded, whereby a scroll field with
more than 6 lines can be implemented on the operating page.
w
Determination if the display line has digital or analog functions, or if it is switched off is made via configurations
(generation of an empty line in the display).
w
Possible display functions are: analog, digital, text, menu, push-button, switch and radio button.
w
Normally, the values applied to the inputs are displayed.
w
A value adjustable at the front panel is output at the relevant function output.
w
Only adjustable lines are selectable.
w
The change of these values from the operating level can be switched off (lock).
w
Parameters z1 ... z6 or y1 ... y6 are used as initial value for the outputs at power-on.
w
The output value is displayed only, if the output is fed back to the relevant input, or if the display for this value is
in the adjustment mode.
w
With a positive flank at the store input, the values applied to the remaining inputs are stored in parameters
z1 ... z6 and y1 ... y6 and thus used as output values.
Value changes are stored as parameters z1 ... z6 or y1 ... y6 in non-volatile EEPROM. With digital input lock
set, no values can be changed. With digital input hide set, the operating page cannot be displayed. The engineering
9499-040-82711 Visualization
VWERT ( display / definition of process values (No. 96) ) III-156
VWERT
Y1
Y2
Y3
Y4
Y5
Y6
Bl-no
Line
z1
z2
z3
z4
z5
z6
change
X1
X2
X3
X4
X5
X6
Casc
hide
lock
d1
d2
d3
d4
d5
d6
store
101 ts=11
Mode 1
Mode 2
Mode 4
Mode 3
Mode 5
Mode 6
Dp1
z2
z3
z4
z5
z6 Y6
Dp2
Dp4
Dp3
Dp5
Dp6
Disp 1
A.A
?1
store
lock
hide
Disp 2
Disp 3
Disp 4
Disp 5
Disp 6
Y5
Y4
Y3
Y2
Y1z1
x1
d1
x2
x3
x4
x5
x6
d2
d3
d4
d5
d6
y1
y2
y3
y4
y5
y6
z1
z2
z3
z4
z5
z6
ALLP
H1
L1
call
page
Casc
Bl-no
Line
change