Manual

4.5 Configuration examples

4.5.1 On-Off controller / Signaller (inverse)

ConF / Cntr: SP.Fn = 0 set-point controller

C.Fnc = 0 signaller with one output

C.Act = 0 inverse action

(e.g. heating applications)

ConF / Out.1: O.Act = 0 action Out.1 direct

Y.1 =1 control output Y1 active

PArA / Cntr: Hys.l = 0...9999 switching difference below SP

PArA / Cntr: Hys.H = 0...9999 switching difference above SP

PArA / SEtP: SP.LO = -1999...9999 set-point limit low for Weff

SP.Hi = -1999...9999 set-point limit high for Weff

For direct signaller action, the controller action must be changed

(ConF / Cntr / C.Act = 1 )

Configuration level

Configuration examples 48 KS 90-1 / KS 92-1

InH.1InL.1

SP.LO SP

SP.Hi

100%

Out.1Â

InP.1Ê

setpoint

output

process value