Owner manual

7 Annex
7.1 Terms
COM PROFIBUS Configuration tool (formerly COM ET200) of the Siemens company for PROFIBUS
FB Abbr. f. function block
Fkt Abbr. f. function
ET Abbr. f. Engineering Tool
Function a self-contained partial function of a function block seen from the interface
Function block self-contained processing unit
GSD file Device-Database-File
HW Abbr. f. hardware
ISO1745 Standard communication protocol ISO 1745, ASCII-based
PC-interface front-panel controller interface for connecting an engineering tool
PCI Process Control Instrument
PCI protocol ISO 1745-based protocol, implemented for PMA controllers
PNO PROFIBUS user organisation
PROFIBUS-DP Standard communication protocol acc. to EN50170 vol.2 (DP: decentral periphery)
RS422 Standard 4-wire connection, full duplex, (EIA RS 422);
in this case: separate send/receive channels with up to 32 connected units
RS485 Standard 2-wire connection, half duplex, (EIA RS 485)
S5 / S7 Siemens AG PLC series
Serial interface bussable rear-panel controller interface
SW Abbr. f. software
Type file Configuration file for COM ET200
7.2 GSD file
Annex
49 9499 040 50511
;=============================================================
; Device Database File for product K S 800-DP
; Copyright (C) PMA Prozeß- und Maschinen Automation GmbH 1998
; D-34123 Kassel, Miramstr. 87, Tel. +49 (0) 561/ 505 -1307
; Release : V1.1
; File: PMA_0800.gsd
;=============================================================
#Profibus_DP
GSD_Revision = 1
Vendor_Name = “PMA GmbH”
Model_Name = “KS 800-DP”
Revision = “V 1.1"
Ident_Number = 0x0800
Protocol_Ident = 0 ; DP
Station_Type = 0 ; Slave
FMS_supp = 0
Hardware_Release = “HV 01.00"
Software_Release = “SV 01.01"
;supported baud rates:
9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;max. time to answer after a request
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250