Owner manual

Name Value range Description
ICof
Block controller off (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
IAda
Block auto tuning (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
ILat
Block error memory (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
IExo
Block extended operating level (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
Pass OFF...9999
Password (only visible with BlueControl
Ò
!)
IPar
Block parameter level (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
ICnf
Block configuration level (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
ICal
Block calibration level (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
T.Dis2
Settings for text in display 2 (max. 5 digits)
(only visible with BlueControl
Ò
!)
Linearization Lin
only visible with BlueControl
Ò
!
Name Value range Description
U.LinT
Temperature unit of the linearization table
0
without unit
1
in Celsius
2
in Fahrenheit
3
in Kelvin
In.1 … In.16 OFF (ab In.3)
-1999...9999
input 1 … input 16
Ou.1 … Ou.16
-999.0 … 9999 output 1 … output 16
Depending on equipment version and the configuration unused parameters are hidden.
g
Value U.LinT defines the unit of input values specified for linearization of temperature values. Value entry
in Celsius despite display of the measured value in Fahrenheit is possible.
w
Specify the input signals mV, V, mA, % or Ohm dependent on input type.
w
For special thermocouples (S.tYP = 18), specify the input values in mV and the output values in the
temperature unit adjusted in U.LinT.
w
For special resistance thermometer (KTY 11-6) (S.tYP = 23), specify the input values in Ohm and
the output value in the temperature unit adjusted in U.LinT .
g
Resetting to factory setting (default)
r chapter 15.4
Configuration level
Configurations 60 KS 45