Owner manual

5.7 Selecting the units
The unit to be displayed is determined via configuration D.Unt.
With selection “1 = temperature unit” , the displayed unit is determined by configuration Unit with the relevant
conversions for Fahrenheit and Kelvin.
By selecting D.Unt = 22, display of any max. 5-digit unit or text can be determined.
1 Unit (example): kilowatt hour
2 Text (example): TAG no.
g
For permanent display the value signals/other/D.Unt must be set in the mode "operating level" via the engineering
tool.
Operation
Selecting the units 21 KS 45
1
2
ME
4.5
kWh
äüüü
1
2
ME
450.3
TI451
äüüü
1
2