Instruction Manual

g
If measured value monitoring + alarm status storage is chosen ( ConF / Lim /
Fnc.x=2), the alarm relay remains switched on until the alarm is resetted in the
error list ( Lim 1..3 = 1).
3.8 Operating structure
After supply voltage switch-on, the controller starts with the operating levels.
The controller status is as before power off.
g
PArA - level: At PArA - level, the right decimal point of the upper
display line is lit continuously.
g
ConF - level: At ConF - level, the right decimal point of the upper
display line blinks
.
When safety switch Loc is open, only the levels enabled by me
-
ans of BlueControl (engineering tool) are visible and accessible
by entry of the password adjusted by means of BlueControl (en
-
gineering tool). Individual parameters accessible without password must be co
-
pied to the extended operating level.
Factory setting:
Safety switch Loc closed: all levels accessible without
restriction, password PASS = OFF.
Safety switch
Loc
Password entered with
BluePort®
Function disabled or enabled
with BluePort®
Access via the instrument
front panel:
closed OFF / password disabled / enabled
enabled
open OFF / password disabled
disabled
open OFF enabled
enabled
open Password enabled
enabled after password
entry
Operation
Operating structure 20 Operating KS4x-1
Ù
Ù
Ù
Ù
End
126
CAL
126
ConF
126
125
126
PArA
126
Ù
Ì
Ì
Ì
3sec.
PASS
PASS
PASS
PASS