Manual

169
23 Configuration – Batches/Plants
Bin. combined
text
One of 128 device-internal batch texts is used. The
selection is made through up to 6 binary signals.
Chapter 23.3.1 "General"
Plant name The plant name is shown.
v Chapter 23.3.1 "General"
Batch No.
plant 1 — 3
One of three batch numbers is used together with an
additional text ("Fixed text"). The batch number is
incremented by one at the end of a batch. It can be
preset in the Parameterization menu.
Batch start Start (date and time) of a batch report.
Batch end End (date and time) of a batch report.
Batch duration The time difference between batch start and batch end.
If, for instance, 2 binary signals are active, then 4 texts
can be inserted. If all 6 binary signals are active, then 64
different texts can be inserted. Binary linkage 1 has the
value 2
0
, binary linkage 2 has the value 2
1
, and so on.
B6 B5 B4 B3 B2 B1 yes
0000000
0000011
0000102
0000113
.......
.......
.......
11110060
11110161
11111062
11111163
0 = set to inactive, or no active signal
1 = not set to inactive, and signal is active
The “Start at text” parameter is added to the text column
for the output of the batch text.