Instruction Manual
63
4 Configuration parameters
Language Configuration
➔ Device data
➔ Language
German, English, French,
Dutch, Spanish, Italian,
Hungarian, Czech,
Swedish, Polish, Danish,
Finnish, Portuguese,
Russian
Temperature unit Configuration
➔ Device data
➔ Temperature unit
°C, °F
Memory upload Configuration
➔ Device data
➔ Memory upload
via CF card,
via RSxxx
You can determine how
data are mainly to be
uploaded. The value for the
available capacity (shown
in the status line) will vary
according to the selection.
Memory alarm Configuration
➔ Device data
➔ Memory alarm
0—10 — 100% The signals
“IntMemAlmCF”,
“IntMemAlmInterf” and
“MemAlmCFcard” are
activated when the residual
capacity of the internal
memory or the CF card has
fallen to this value. Chapter
2.4 “Digital signals (event
traces)”
Code number for
the configuration
Configuration
➔ Device data
➔ Code No. (password)
➔ Configuration
00000 — 09200 — 09999 Code number for
configuration level;
0000 = off
The data saved in the
FLASH memory will be
deleted when the
configuration is changed.
Code number:
CompactFlash
card menu
(CF code No.)
Configuration
➔ Device data
➔ Code No. (password)
➔ CF manager
00000 — 09200 — 09999 Code number for
menu functions
CompactFlash card;
0000 = off
Code number:
Reset counter/int.
Configuration
➔ Device data
➔ Code No. (password)
➔ Reset counter/int.
00000 — 09200 — 09999 Code number to delete
individual counts;
0000 = off
Code number:
RS232/RS485 +
Ethernet
Configuration
➔ Device data
➔ Code No. (password)
➔ RS232/RS485+
Ethernet
00000 — 09999 Code number as
protection against
unauthorized access to
data via one of the
interfaces;
0000 = off
Factory setting Configuration
➔ Device data
➔ Enter defaults
No, Yes Yes = enter factory default
setting (after entry, the
parameter automatically
returns to No)
Parameter Value/Selection Description