Instruction Manual

4 Configuration parameters
62
4.2.2 Configuration - Instrument (device) data
Parameter Value/Selection Description
Device name Configuration
➔ Device data
➔ Device name
16 characters
Date Configuration
➔ Device data
➔ Date and time
➔ Date
any date Entry of the current
date
Time Configuration
➔ Device data
➔ Date and time
➔ Time
any time Entry of the current
time
Time
synchronization
Configuration
➔ Device data
➔ Date and time
➔ Time
synchroniz.
Off,
Bin. inp. 1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb.al.,
High alarm 1 — 6,
High comb.al.,
Count/Int/Al 1 — 6,
C/i. comb.al.,
Comb. alarm,
CF inserted,
IntMemAlmCF,
IntMemAlmSer,
MemAlmCFcard,
Error, Modbus flag,
With the help of this
parameter (function), the
system clocks of several
paperless recoders can be
simultaneously
synchronized.
When a binary input has
been selected and is
activated (transition from
“Low” to “High”), then the
time can be synchronized.
The seconds are decisive
in the time change. They
are used for rounding the
time up or down.
Example:
12:55:29 -> 12:55:00
12:55:30 -> 12:56:00
Summer time
(switch)
Configuration
➔ Device data
➔ Summer time
➔ Switch
Off,
User timed,
Automatic
Automatic:
2:00 hrs or 3:00 hrs on the
last Sunday in March or
October
Summer time
(start date)
Configuration
➔ Device data
➔ Summer time
➔ Start date
any date Can only be set if
switch is set
to user timed
Summer time
(start time)
Configuration
➔ Device data
➔ Summer time
➔ Start time
any time Can only be set if
switch is set
to user timed
Summer time
(end date)
Configuration
➔ Device data
➔ Summer time
➔ End date
any date Can only be set if
switch is set
to user timed
Summer time
(end time)
Configuration
➔ Device data
➔ Summer time
➔ End time
any time Can only be set if
switch is set
to user timed