Owner manual

8.3 Parameters
µ The entries marked with this symbol are selectable only with the instrument option fitted.
Function selection Func
Name Value range Description
tEmP
0...9999 Probe temperature for O
2
-measurement µ
t.I 0,1...9999 Integrator-Zeitkonstante in Minuten µ
P.I -1999...9999 Integrator-Offsetµ
Inputs InP.1 and InP.2 µ
Name Value range Description
InL.1(InL.2)
-1999...9999 Input value of the lower scaling point
Oul.1 (OuL.2)
-1999...9999 Display value of the lower scaling point
InH.1 (InH.2)
-1999...9999 Input value of the upper scaling point
OuH.1 (OuH.2)
-1999...9999 Display value of the upper scaling point
T.F1 (t.F2)
0...999,9 Filter time 1 [s]
B.F1 (b.F2)
0...9999 Filter bandwidth
E.tc1(E.tc2)
OFF, 0...100 external cold junction compensation, range depends on temperature unit
Counter/frequency input µ
Name Value range Description
Cnt.d
0,1...9999 Counter divider
Cnt.S
0...9999 Counter start value
Cnt.E
0...9999 Counter end value
Frq.L
0.000...100.0 Lower input value in kHz
Ou.L
-1999...9999 Lower output value in phys. units
Frq.H
0.000...100.0 Upper input value in kHz
Ou.H
-1999...9999 Upper output value in phys. units
Frq.F
0...9999 Filter time constant in s
Limit values Lim1 … Lim 3
Name Value range Description
L.1
-1999...9999 Lower limit 1 (L.1< -1999 = off)
H.1
-1999...9999 Upper limit 1 (H.1< -1999 = off)
HYS.1
0...9999 Hysteresis 1
dEL.1
0...9999 Limit 1 delay
L.2
-1999...9999 Lower limit 2 (L.2< -1999 = off)
H.2
-1999...9999 Upper limit 2 (H.2< -1999 = off)
HYS.2
0...9999 Hysteresis 2
dEL.2
0...9999 Limit 2 delay
L.3
-1999...9999 Lower limit 3 (L.3< -1999 = off)
H.3
-1999...9999 Upper limit 3 (H.3< -1999 = off)
HYS.3
0...9999 Hysteresis 3
dEL.3
0...9999 Limit 3 delay
g
For resetting the parameters to factory setting (default),
r section 12.4, 6.17 (page 37)
Parameter setting level
48 Parameters UNIFLEX CI 45