Owner manual

Name Value range Description
tArA
Tare-function µ (function must be activated (CONF /FUNC / Fnc.3 = 1))
0 No function (switch-over via interface is possible).
2 Di1 switches.
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
HoLd
Sample & hold -function µ(function must be activated (CONF /FUNC / Fnc.3 = 2))
0 No function (switch-over via interface is possible).
2 Di1 switches.
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
rES.L
Reset minimum value
0 No function (switch-over via interface is possible).
2 Di1 switches.
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
rES.H
Reset maximum value
0 No function (switch-over via interface is possible).
2 Di1 switches.
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
rES.I
Reset Integrator
0 No function (switch-over via interface is possible).
2 Di1 switches
6 Reset-key switches
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
rES.C
Zähler-Reset
0 No function (switch-over via interface is possible).
6 Reset-key switches
7 Limit 1 switches
8 Limit 2 switches
9 Limit 3 switches
fDI1 Forcing of digital input di 1 (only visible with BlueControl!)
0 Not active
1 The value for this output is preset via interface
Other othr
Name Value range Description
bAud
Bit rate of the interface µ
0 2400 Baud
1 4800 Baud
2 9600 Baud
3 19200 Baud
4 38400 Baud
Addr
1...247 Address on the interface µ
Configuration level
44 Configurations UNIFLEX CI 45