Owner manual

5.4.4 Slave pointer function
The minimum and maximum input values are stored in the unit.
The minimum input value is displayed as long as key Ì is
pressed.
The maximum input value is displayed as long as key È
is pressed.
Deleting the minimum value
The minimum value is deleted by pressing key È whilst key Ì is kept pressed.
Whether the minimum value should be deleted also by the digital input (rES.L) can be determined during
configuration.
Deleting the maximum value
To delete the maximum value, press key Ì whilst keeping key È pressed.
Whether the maximum value should be deleted also by the digital input (rES.H) can be determined during
configuration.
Deleting the minimum and maximum values is possible also via interface.
g
When de-energizing UNIFLEX CI 45, the minimum and maximum values are deleted.
g
In case of error of the display value (e.g. input fail behaviour), the minimum and maximum values are also
set to FAIL. When a valid value is displayed again, the minimum and maximum value are deleted.
5.4.5 Selecting the units
The unit to be displayed is determined via configuration D.Unt.
With selection “1 = temperature unit” , the displayed unit is determined by configuration Unit with the relevant
conversions for Fahrenheit and Kelvin.
By selecting D.Unt = 22, display of any max. 5-digit unit or text can be determined.
1 Unit (example): kilowatt hour
2 Text (example): TAG no.
Operation
UNIFLEX CI 45 Operating level 17
1
2
FE
450.3
26.7
äüüü
1
2
FE
450.3
ûC
äüüü
min
1
2
FE
450.3
502.4
äüüü
1
2
FE
450.3
ûC
äüüü
max
1
2
FE
4.5
kWh
äüüü
1
2
FE
450.3
TI451
äüüü
1
2