Manual

1
/
4
-DIN,
1
/
8
-DIN &
1
/
16
- DIN Controllers & Indicators - Product Manual
Page 90 P6700, P8700& P4700 Model Group 59305, Issue 7 – March 2014
Parameter
Lower
Display
Upper Display
Adjustment Range
Default
Value
When
Visible
Process High Alarm 1
value*

Range Min. to Range
Max.
Range
Max.
 = 
Process Low Alarm 1
value*

Range Min. to Range
Max.
Range
Min.
 = 
Deviation Alarm 1
Value*

span from setpoint

 = 
Band Alarm 1 value*

1 LSD to full span from
setpoint.

 = 
Alarm 1 Hysteresis*

Up to 100% of span

Always
Process High Alarm 2
value*

Range Min. to Range
Max.
Range
Max.
 = 
Process Low Alarm 2
value*

Range Min. to Range
Max.
Range
Min.
 = 
Deviation Alarm 2
Value

span from setpoint

 = 
Band Alarm 2 value*

1 LSD to full span from
setpoint.

 = 
Alarm 2 Hysteresis*

Up to 100% of span

Always
Set-up Lock Code

0 to 9999

Always
**First Operator mode displays follows.
Note:
Alarm parameters marked * are repeated in Configuration Mode.
Note:
**Once the complete list of Set Up Mode parameters has been displayed, the first
Operator Mode display is shown without exiting from Set Up Mode.
CAUTION:
An excessively large filter time could significantly delay detection of a limit
condition. Set this value to the minimum required to remove noise from the process
variable.